Official support from Canonical for the Raspberry Pi has come a long way. We can now install officially supported Ubuntu on the Pi!
This guide takes it a step further and shows you how to get Ubuntu 20.04 / 20.10 working with a SSD!
Category page of all posts on the web site that are tagged as related to single board computers, their accessories, etc.
We’ve now received over 20,000 benchmarks at https://storage.jamesachambers.com/! These are submitted by regular people from all over the world.
In celebration of that milestone as well as the launch of the 8GB Raspberry Pi 4 take a closer look at which device you should choose for your Raspberry Pi 4 as determined by science and measurement!
After receiving quite a few requests for a lightweight alternative to the default Ubuntu Desktop environment I have added Xubuntu Desktop to my Raspberry Pi 4 Ubuntu 18.04 LTS preinstalled image builds! The Xubuntu version feels much snappier and more responsive on the Pi. It also uses less overall memory freeing it up to do other things on your Pi.
All of the previous generations of Raspberry Pi contained all of their firmware on the SD card. Starting with the Raspberry Pi 4 the device actually has onboard upgradable firmware stored on an EEPROM chip separate from your storage. Updating this firmware is very important as one of the first released updates reduces power usage of the Pi by 30% which also reduces how hot it gets.
In this guide I’ll show you how to update the bootloader firmware (no, it’s not apt-get upgrade, it’s a new utility called rpi-eeprom!) and also show you how to make a recovery SD card if your firmware gets corrupted and needs to be reflashed.
This is a unofficial distribution of Ubuntu Server 18.04.3 for Raspberry Pi 4. It is provided with the purpose of letting us all play with the new Pi 4’s new increased RAM and other capabilities until Ubuntu’s repositories are updated with support for the newest Pi.
Once official support is released through the Ubuntu repositories this project will effectively cease to exist (until, dare I dream, the Pi 5?). The image supports KVM, has support for the Pi 4’s new 3D display driver, and can also be upgraded to a full desktop installation!
The Raspberry Pi 4 is finally here and has a lot of exciting changes. One very major downside is that it doesn’t support true USB booting yet out of the box (like the 3 series did).
The Raspberry Pi foundation states that it is being worked on and will be added back with a future update. No timeline has been given yet for that to happen but they state it’s one of their top priorities.
Most of my projects heavily depend on having good performing storage so sitting and waiting was not an acceptable solution. In this guide I’ll show you a workaround to use USB devices as your rootfs device and use a Micro SD card as bootloader only which gives us full SSD performance after boot!
One of the most requested features in my Raspberry Pi Minecraft server guide is support for the Bedrock edition of Minecraft. This is the edition that powers Minecraft on iOS / Android / Xbox / Nintendo Switch as well as the free Windows 10 edition.
There’s one big problem though. The official Minecraft Bedrock dedicated server is only compiled for Windows and Ubuntu X86_64. Without ARM support it seems impossible to run the Bedrock dedicated server on a Raspberry Pi. I couldn’t find a documented instance of anyone doing it anywhere.
So naturally today in this guide we are going to do the impossible. But right off the bat let me point out that there is an asterisk in my article title. Why you ask? That is because unlike my other guides this one will not yield you a well performing server. That is because we will be emulating a x86_64 processor on ARM. This is slow. VERY slow.
Storage options continue to advance at a very fast pace. We’ve seen a lot of changes in the past couple of years with viable storage options for your Pi. Solid state drives are now so cheap that it can be cheaper to outfit your Pi with a SSD than buy a MicroSD card! MicroSD cards also continue to evolve with the new “Application Class” A1 and A2 certifications.
This year I wanted to do something more than just benchmark my ever-growing pile of MicroSD cards and solid state drives. Although I have a wide variety of storage to test I don’t have everything! So this time I created a benchmark that gives you a easy to compare score and anonymously submits the storage specifications and the results to this site.
Running the benchmark is a one-liner:
curl https://raw.githubusercontent.com/TheRemote/PiBenchmarks/master/Storage.sh | sudo bash
P4wnP1 A.L.O.A. is a tool for the Raspberry Pi Zero W that allows you to plug a Pi into a host computer and send remote commands and share networking with a host computer all without any user interaction. A.L.O.A. stands for “A Little Offensive Appliance”.
There’s practically no defense to this type of attack other than physically securing your USB ports. Let’s jump right in!
Ubuntu Server has been my favorite Linux distribution for years. On everything but the Raspberry Pi I run Ubuntu Server but felt stuck with Raspbian on the Pi. Until now!
The Raspberry Pi 4 is now supported. Previously Ubuntu Server for Pi (like many other distros) had broken or completely missing drivers for core components such as WiFi / Bluetooth. In the 18.04.2 update the firmware for the WiFi and other components is now included out of the box making it a fully functional distribution!
Based on the comments and feedback from my older guides I have added many requested features and fixes. It has changed so much since 1.12’s World of Color that my old guide is now obsolete and it’s time for the 1.13 Aquatic era update!
This script and guide are written to help you get a great performing Raspberry Pi Minecraft server up and running in only a few minutes.