Minecraft Bedrock Edition – Ubuntu Dedicated Server Guide

Minecraft: Bedrock Edition Logo

Minecraft Bedrock Edition is the version of Minecraft that powers the iPhone / Android versions (formerly Minecraft Pocket Edition), the Xbox / PlayStation / Nintendo Switch editions and the free Windows 10 Minecraft edition.

Mojang has released a dedicated server which is considered to be in alpha testing.  I have found it to be very stable and able to run on a wide variety of hardware.

This script and guide are written to help you get a robust Minecraft Bedrock dedicated server up and running in only a few minutes!

Features

  • Sets up fully operational Minecraft Bedrock edition server in a couple of minutes
  • Ubuntu / Debian distributions supported
  • Sets up Minecraft as a system service with option to autostart at boot
  • Automatic backups when server restarts
  • Updates automatically to the latest version when server is started
  • Easy control of server with start.sh, stop.sh and restart.sh scripts
  • Optional scheduled daily restart of server using cron

Requirements

  • A computer with a x86_64 bit processor
  • 1 GB of RAM or higher

Recommended Gear

Storage

I strongly recommend a Solid State drive (SSD) for your server. These are much cheaper than they used to be. Here’s a decent one at a very low price:


Kingston A400 SSD 120GB SATA 3 2.5” Solid State Drive

This image has an empty alt attribute

Computer / CPU / Memory

Almost any PC made in the last few years will be a x86_64 bit computer. If you have an older computer around that isn’t being used then it will most likely have the right CPU and amount of memory to run a basic server.

Throwing a SSD in one of these older computers will provide an excellent server experience for small and larger player counts.

Cheap SBC Option

If you don’t have an old PC laying around or want something that is more portable and uses much less power than a PC consider the Intel Compute Stick. It’s a Intel X86_64 with 1 GB of RAM for around the same price as a Raspberry Pi.

Intel Compute Stick STCK1A8LFC

This image has an empty alt attribute
Intel Compute Stick

The Intel compute stick is just a little bit bigger than a USB flash drive and is powered by Micro USB. I developed this entire script and guide using one.

If you choose this option check out my guide here for how to install Ubuntu Server 18.04 on it here: https://www.jamesachambers.com/2019/02/install-ubuntu-server-18-04-on-intel-compute-stick-guide/

Mid Range Option

This is a cheap mini PC that has 2 GB of RAM and comes preloaded with Windows 10. I would just blow away the Windows 10 installation and put Ubuntu Server on there. You can upgrade to the 4 GB of RAM version for a little more.

ACEPC T8 Fanless Mini PC

ACEPC Mini PC

Higher End Option

This is a full blown PC in Micro ATX form that uses much less power and takes up much less space than a traditional ATX or Mini ATX PC.

Warning: This is the absolute highest price point you want to go before it makes much more sense to just buy a used PC off eBay or local listings. You should be able to find a used PC with 4-8 GB of RAM for less than a new computer relatively easily.

The upside of this option is that you are covered by manufacturer’s warranty and have support if needed but above this price point it’s easier to just buy a different used one if you start having problems!

Dell Optiplex Micro 8GB RAM

Dell OptiPlex Micro

I have a couple of these little Optiplex towers running VMs and other server applications and they have been fine and the Linux support is good.

Getting Linux

I highly recommend using Ubuntu Server to run the Minecraft dedicated server. It is available here:

https://www.ubuntu.com/download/server

At the time of writing the current version is Ubuntu Server 18.04.2. This is a secure and robust operating system and will leave plenty of resources available for the server to run.

The script should run on any Debian based flavor of Linux but since the Minecraft Bedrock server is compiled natively for Ubuntu I recommend sticking with it. If you have a GUI flavor of Ubuntu and a decent PC (>= 2 GB of RAM) the server will work just fine on it.

Download the image and write it to a USB drive. If you are on Windows Win32DiskImager is a easy to use program to do this. Now boot the computer from the USB drive and follow the installation instructions.

Make a note of the IP address during installation or alternatively log into your home router and see what IP address the machine was assigned. You’ll need this later to connect to the server from the Minecraft client.

Installation

Log into your Linux server either using SSH or a mouse and keyboard and paste/type the following command:

wget https://raw.githubusercontent.com/TheRemote/MinecraftBedrockServer/master/SetupMinecraft.sh
chmod +x SetupMinecraft.sh
./SetupMinecraft.sh

The script will setup the Minecraft sever and ask you some questions on how to configure it. I’ll explain here what they mean.

“Start Minecraft server at startup automatically (y/n)?” – This will set the Minecraft service to start automatically when your server boots. This is a great option to set up a Minecraft server that is always available.

“Automatically restart and backup server at 4am daily (y/n)?” – This will add a cron job to the server that reboots the server every day at 4am. This is great because every time the server restarts it backs up the server and updates to the latest version. See the “Scheduled Daily Reboots” section below for information on how to customize the time or remove the reboot.

That is it for the setup script. The server will finish configuring and start!

First Run

The server will start up and start displaying output to the console.

[2019-03-30 20:25:12 INFO] Starting Server
[2019-03-30 20:25:12 INFO] Version 1.10.0.7
[2019-03-30 20:25:12 INFO] Level Name: Bedrock level
[2019-03-30 20:25:12 INFO] Game mode: 0 Survival
[2019-03-30 20:25:12 INFO] Difficulty: 1 EASY
[2019-03-30 20:25:20 INFO] IPv4 supported, port: 19132
[2019-03-30 20:25:20 INFO] IPv6 supported, port: 19133
[2019-03-30 20:25:23 INFO] Server started.

Once you see the “Server started” line you will be able to connect from the client.

To add the server to the client open Minecraft and click “Play”. Then at the top of the screen select the “Servers” tab and click “Add Server”.

This will ask you for a Server Name and Server IP Address. For the name you can put anything and for the server IP address put the address of your Linux server. Leave the port as the default 19132. For more information on how to let people from outside your network on go to the “Port Forwarding” section below.

Now choose the server you just added in the list and connect!

Start, Stop and Restart Server

The server can be started, stopped and restarted two different ways. You can use the provided scripts in the Minecraft folder or you can use systemctl. Here are the commands:

cd ~/minecraftbe
./start.sh
./stop.sh
./restart.sh

-OR-

sudo systemctl start minecraftbe
sudo systemctl stop minecraftbe
sudo systemctl restart minecraftbe

Automatic Backups

The server backs up each time it starts. This helps you recover easily if something goes wrong. This system works best if you configured the server to restart daily since it means you will have a backup every day.

To access these backups type:

cd ~/minecraftbe/backups
ls

When a backup is made the filename will be the date and time the backup was taken. If you need to restore a backup it’s very easy. Substitute the timestamp in my example to the backup you want to roll back to. Type:

cd ~/minecraftbe
./stop.sh
rm -rf worlds
tar -xf backups/2019.02.15.22.06.30.tar.gz
./start.sh

Your world has now been restored! It’s a good idea to download these backups off the server periodically just in case the server’s storage fails.

Scheduled Daily Reboots

The daily reboots are scheduled using cron. It’s very easy to customize the time your server restarts.

To change the time that the server restarts type: crontab -e

This will open a window that will ask you to select a text editor (I find nano to be the easiest) and will show the cronjobs scheduled on the server. The Minecraft one will look like the following:

0 4 * * * /home/ubuntu/minecraftbe/restart.sh

There are 5 fields here. The default restart time is set to reboot at 0 minutes of the 4th hour of the day (4 AM). The other 3 fields are left as * to represent every day of every month. Make any desired changes here and press Ctrl+X to exit nano and update the cronjob.

To remove the daily reboot simply delete the line and save.

Reconfigure / Update Scripts

The scripts can always be reconfigured and updated by downloading the latest SetupMinecraft.sh and running the installer again. It will update all of the scripts in the Minecraft directory and reinstall the startup service for you.

Running SetupMinecraft.sh again will also give you a chance to reconfigure options such as the memory dedicated to the server, daily reboots, starting the server on boot, etc.

This will not overwrite your world or any other data so it is safe to run!

Port Forwarding

If everyone on your server is on the same LAN or WiFi network as you then you don’t need to do this. If you want people to connect from outside your local network then you need to set up port forwarding on your router.

The process for this is different for every router so the best thing to do is just look at your router and find the model # and put that in google with port forwarding for easy instructions on how to do it for your specific router.

You want to forward port 19132. The type of connection is both TCP and UDP. On some routers you need to do both a TCP entry and then a second entry as UDP.

Once you do this people will be able to connect to your Minecraft server through your public IP address. This is different than your local IP which is usually a 192.x.x.x or 10.x.x.x. If you don’t know what that is just go to google and type “what’s my ip” and Google will kindly tell you!

Wired vs. Wireless

Going with an ethernet (wired) connection is going to be faster and more reliable. There’s so much wireless traffic and other interference in the air that running your server on WiFi is not recommended.

Even if it is working great 99% of the time it can ruin your experience very quickly if the WiFi drops for a couple of seconds and you get blown up by a creeper!

All that being said, the server works fine on wireless. The script will work fine as is with a wireless connection.

Conclusion

The Minecraft Bedrock Edition dedicated server runs much better than previous third party servers in the past that were missing critical features. The performance is very good even on low end hardware. It has never been easier to set up a Minecraft Bedrock server.

If you have any feedback or suggestions let me know in the comment section. A lot of the changes and developments in this script and guide are directly from readers.

Have fun!

Comments 8

  • Worked perfect! Screen threw me off until I figured out the commands… question, is it possible to run multiple worlds?

    • Hey Jose,

      It’s definitely possible to run multiple worlds. The easiest way would be to create a copy of the folder and then change the ports in server.properties to different ones.

      If you don’t want to run the different worlds at the same time you can also look in the “worlds” folder. These can be switched to by changing the world in server.properties or moving/renaming the folders.

      Let me know how it goes. I could definitely look into adding support into this natively in the script if there’s some interest!

  • Hi,
    Thanks for your work, I followed the intructions above but got the following errors on Debian Buster any ideas?
    Thanks

    Started minecraftbe server service.
    Server is not currently running!
    minecraftbe.service: Control process exited, code=exited status=1
    minecraftbe.service: Unit entered failed state.
    minecraftbe.service: Failed with result ‘exit-code’.
    Configuration file /etc/systemd/system/minecraftbe.service is marked executable. Please remove executable permission bits. Proceeding anyway.

  • After installation server don’t running. Trying to start.sh got this:

    root@test:~/minecraftbe# ./start.sh
    Checking for the latest version of Minecraft Bedrock server …
    –2019-05-22 02:53:56– https://minecraft.net/en-us/download/server/bedrock/
    Resolving minecraft.net (minecraft.net)… 13.32.57.36, 13.32.57.54, 13.32.57.35, …
    Connecting to minecraft.net (minecraft.net)|13.32.57.36|:443… connected.
    HTTP request sent, awaiting response… 302 Moved Temporarily
    Location: https://www.minecraft.net/en-us/download/server/bedrock/ [following]
    –2019-05-22 02:53:57– https://www.minecraft.net/en-us/download/server/bedrock/
    Resolving http://www.minecraft.net (www.minecraft.net)… 152.199.20.92, 2606:2800:233:18f9:1142:8f:20aa:11e2
    Connecting to http://www.minecraft.net (www.minecraft.net)|152.199.20.92|:443… connected.
    HTTP request sent, awaiting response… 200 OK
    Length: 300992 (294K) [text/html]
    Saving to: ‘downloads/version.html’

    downloads/version.h 100%[===================>] 293.94K –.-KB/s in 0.06s

    2019-05-22 02:53:57 (4.52 MB/s) – ‘downloads/version.html’ saved [300992/300992]

    Minecraft Bedrock server is up to date…
    Starting Minecraft server. To view window type screen -r minecraft.
    To minimize the window and let the server run in the background, press Ctrl+A then Ctrl+D

    • Can you try running the server manually to see what happens?

      To run it manually cd to the minecraftbe directory and type: LD_LIBRARY_PATH=. ./bedrock_server

      Let’s see if you get any errors. Also which distro are you running?

  • The server doesn’t come back online when it restarts itself at the scheduled time.

    • Thank you for the report. I found the problem. I had a space after the stop command in restart.sh. After removing the space restart.sh is working correctly again.

      I have committed these changes to the latest version. Just run SetupMinecraft.sh again and it will pull down the latest scripts!

  • Is there a way to run this on a remote server? I can’t exactly setup port forwarding on a router in an Amazon datacenter in Oregon.

Leave a Reply to Jose Cancel reply

Your email address will not be published. Required fields are marked *